Types of Decks: Comprehensive Guide on Styles and Materials for Your Perfect Home Deck
Decking Materials: Composite, Wood, or Plastic? This increases the carbon footprint and doesn’t necessarily translate to a higher-quality deck board. Below we compare the costs, durability and appearances of wood and composite decking. If neither option sounds right for you, there’s also synthetic PVC decking, which we discuss later in the guide. Pressure-treated wood is an essential material for outdoor construction projects, offering unparalleled durability and resistance to decay. Composite metal floor decks are strong and lightweight and can have deep or shallow profiles depending on the end requirement. The three common types of composite floor decks are 1.5-inch, 2-inch, and 3-inch composite decks. Pressure-treated wood is one of the most cost-effective choices for decking material overall. Manufacturers take Southern yellow pine and put it through a chemical process to harden it and make it more resistant to insects and moisture. Cooking areas ideally should be situated near the patio door while out of the way from general foot traffic. For a typical six-person outdoor patio table building, an area of 3.7 m × 4.9 m (12 ft × 16 ft) is ideal. If deck space is available, homeowners may choose to include for the seating, outdoor couches and benches.
If you have a flat roof on the front or back of your home or your garage, a rooftop deck can create a standout outdoor living area, especially if you have limited yard space. Since it's an elevated deck, it provides privacy, unique vantage point, and often, an amazing view. Often built at the front of a home, an entryway deck extends your outdoor living space toward the street. If you don't have a front porch, an entryway deck can connect you with your neighbors or a beautiful front view.
How to Choose the Right Kind of Pressure-Treated Lumber
These requirements can include a specific height for the deck and guards, as well as self-closing and self-latching gates that allow access to the pool deck. Polyvinyl chloride (PVC) plastics are available in many levels of quality, but nearly all are resilient. High-quality PVC decking has almost none of the vulnerabilities of wood.
HDPE Decking
When it comes to decking, there are a lot of materials out there to choose from. PVC decking has been gaining popularity in recent years due to its durability and low maintenance requirements. However, like any material, it has both pros and cons that should be considered before making a decision. Composite decking is a popular option for those who desire the look and feel of wood, without the maintenance headaches. As with any material, there are pros and cons to consider when deciding if composite decking is right for you.
If the structure is built like a deck, then it is a deck, regardless of where it is located and what it is called.Protecting your deck from water damage is essential for maintaining its longevity.Cedar and redwood are popular choices for their natural beauty and resistance to rot and insects.
That means you don’t have to worry about sanding or staining, which makes vinyl decking almost maintenance-free. Lumber grades tell you the number of knots, imperfections, and the straightness of the wood grain. At Decks & Docks, we only sell the higher grades of lumber, which means fewer knots, consistent boards, and longer life. At Decks & Docks, our top choice for many projects is pressure-treated Southern Yellow Pine. As the name implies, a wraparound deck is an attached deck that connects to more than one side of your home and creates an expansive outdoor area. Most wraparound decks have railings and are slightly elevated to meet your home’s floor level. Maintenance requirements and design options can also impact installation time. In our next section, we’ll dive into how you can https://www.cylex.us.com/company/clear-view-builders-39251615.html add privacy to your outdoor space using fencing and screening options.
